STABLE NEWS
Company News YOU ARE HERE:INDEX > STABLE NEWS
Analysis of the causes of Beijing shelf shelf price distortion


We should see the supermarket, or other places where the shelf deformation, the deformation of the majority of the shelf because of the pressure to withstand the pressure is too large, but certainly there are other reasons. Today, the price of the shelves in Beijing to bring you together to understand.
1, the weight distribution is not uniform, will cause the deformation of the shelf, if placed in the goods, the weight of each layer of goods are concentrated in the middle part, and both sides have no load on the weight of goods, it will cause the shelf deformation.
2, the goods placed more than the shelf shelf, that is, the shelves at the time of purchase, warehouse shelves manufacturers will be based on the load of the goods to choose the corresponding material, and if the actual use, the weight of the goods when the weight of the selected material, the shelf will occur.
3, material selection improper reason, the customer when buying shelf, inevitably will encounter some bad shelves manufacturers cut corners, cheating, thus let the shelf deforms.
4, improper handling equipment operation, sometimes, the use of units in the use of equipment such as forklift truck to the goods, the problem, will lead to forklift truck hit the shelves, which leads to the shelf deformation.
Then the Beijing shelf small make up and asked how to avoid the shelf deformation


When designing the shelves, we must follow the basic principle of design.
1, the selection of high quality steel.
2, the goods evenly distributed on the shelf, to avoid the goods placed in the same position.
3, handling the time to the appropriate operation.
Network marketing | Customer evaluation |  Website map|  Friendly link| Message board |  Enterprise mailbox
体新福建22选5走势图